Today we’re gonna show you how to spread the wax on a car using a dual action polisher. I’m going to use the TORQ22D dual action polisher to wax this Subaru.
How To Apply Car Wax By Machine – TORQ22D
The TORQ22D comes with a large 6” backing plate, which is great if I want to polish or spread the wax over a large vehicle, or one with lots of flat panels. This Subaru is a smaller car with lots of curves and contours,
so I want to use a smaller pad to spread the wax evenly over all those areas. I’m going to switch from the included 6” backing plate to the TORQ22D 5” backing plate, so I can use a smaller pad to spread the wax evenly.
To get started, I’ll lay the machine on its dorsal side where it has this unique stopper. I can lay it down flat, and it won’t fall over! That will make it easier to change pads or the backing plate.
The machine comes with some spare parts and instruction manuals, but there’s also an included Allen Key. This is the only tool you need to change out the backing plate.
You see in the middle of the backing plate is a small bolt: just take the Allen Key, get it in the head, then break the tension on the screw. Now I can unscrew the single bolt. This is all you have to do to switch backing plates on the TORQ22D.
The TORQ22D is the only large-throw dual action polisher that allows you to switch backing plate sizes without extensive modification or voiding the machine’s warranty. Some other machines may use a 15mm or 21mm throw, but you’re not allowed to switch between the 5” or 6” backing plates without voiding the warranty.
The TORQ22D is designed to accept either one without any modifications. To spread the wax today, I’m going to use the Black Hex-Logic Pad. This is a soft finishing pad. It has no extra cut, so I’m not polishing or removing any paint: I’m just going to spread the wax in a nice even coat with the soft pad.
Now I have the perfect combination of machine, backing plate, and pad to get the job done. Let’s go ahead and move over to the Subaru to get the perfect coat of wax. To get started, I already washed the car and conducted a clay bar service so the paint feels smooth as glass.
Now we just need to add the perfect layer of wax for the best protection to keep this World Rally Blue paint looking awesome! Waxing a car with a machine polisher is the fastest way to wax an entire car.
You also use the least amount of product because you get the thinnest, most even layer across every surface. I’ll take some Butter Wet Wax and put a few dots across this Black Hex-Logic Pad. These few dots are enough to do the entire front end, and then some. To get started, I’ll flip the cord back over my shoulder, and dab the wax out across the surface… that way when I turn the machine on, I won’t fling any around the car and where I don’t want it.
I’ll flip the machine one, and I’m just going to use speed setting 1 to spread the wax. I’m not working the wax in, I’m not polishing the paint, I’m just spreading the wax across the paint like how you’d spread butter on toast.
I don’t need to work it in at all, I just need to spread it across in a nice even coat. Now you’ve seen how fast and easy it was to spread wax using the TORQ22D dual action polisher. Since I used Butter Wet Wax, I don’t have to wait for any dry or cure times.
Read More: Taller Mecanico United States
Watch the video
Read Other Posts:
- How To Change Your Name On Facebook 2023
- How to change Youtube channel name without changing google name
- How To Use Apple Pay On Amazon on Iphone 2022
- How To Solve a Rubix Cube in 2 moves
Butter Wet Wax is wax on/wax off.
So I’ll take a Workhorse Microfiber Towel and buff off the residue to reveal a nice lustrous protected surface! This looks great on this World Rally Blue: really makes it look extra deep blue and wet. Butter Wet Wax removes very easily from the clear bra as well. It buffs off the headlight easily, no problem.
So if you have any questions about the products we used today, like the TORQ22D polisher, or the 5” backing plate for the machine, you can check them out on our website: the link is right below! If you want to learn how to detail part of your vehicle,
Best Power Waxer/Polisher 2022
Here is the list of Best Power Waxer/Polisher 2022 for you. If you want, you can buy your favorite from this list made by us.
Chemical Guys BUF_503X TORQX
Random Polisher Kit with Pads,
Polishes & Compounds (9 Items)
TORQ Tools set out to develop an auto detailing tool that anyone could use, enjoy and afford. The TORQ Random Orbital Polisher is a machine for the avid detailer and weekend warrior who wants to do it with a machine.
With TORQ, anyone can polish paint, remove swirls and scratches, spread wax and sealant, scrub carpets, restore cleanliness and clarity to headlights, and more.
TORQ engineers have designed the TORQ for years of reliable detailing with simple and intuitive controls, rugged components, and durable construction materials. TORQ’s powerful 680-watt motor provides the power and torque needed by enthusiasts and professionals alike.
The TORQ uses the same gentle dual action motion and 8mm throw that enthusiasts and professional detailers know and trust on even the most sensitive or durable paint finishes.
TORQ is a powerful tool that will not stop polishing, waxing, or hardcore cleaning on any vehicle. Easily polish single stage, clear coat, or new ceramic clear coat paint finishes polished metals, glass, and clear optical plastics with TORQ.
The tight form factor and perfect balance of TORQ fit comfortably in the hand and are perfect for any detailed situation. Use TORQ to comfortably polish cars, trucks, large RV or trailer sidewalls, boats and airplanes, and any other automotive surface without stress or fatigue. The TORQ is the machine of choice for any beginner, hardcore enthusiast, or professional detailer looking for a simple, lightweight, and powerful machine that can do it all. Tackle any detailed task with TORQ.
How to use it:
1) Shake well and apply 4-5 drops of V36 to the orange pad.
2) Prime pad with pad conditioner.
3) Dab product evenly across 2′ x 2′ sections.
4) Turn the machine on the surface at speed setting 1 to spread the product.
5) Increase speed to 5-6 and use medium pressure.
6) The work area is moved in 2-3 until the product is clear.
7) Check the results. If you are satisfied with the results, proceed to step 10.
8) If you are not satisfied with the result, try using V34 with the orange pad; If you are satisfied, proceed to step 10.
9) If a more aggressive approach is required, switch to the yellow cutting pad.
10) Refine the finish with a white pad and V38 Final Polish.
11) Work until optical clarity is achieved.
12) Remove residue with a clean microfiber towel.
2. BLACK+DECKER 6-inch Random Orbit Waxer/Polisher (WP900)
2- Polishing Bonnet, Polisher, Battery-Charger, Comfortable Two-Handle Design, Black & Decker Wp900 6-Inch Random Orbit Waxer/Polisher, 1- Foam Applicator Bonnet, Bare-Tool, Black & Decker 6-Inch Random Orbit Waxer/Polisher Polish, wax, attachment
About this item
Random-orbit action ensures a uniform finish – fast for the car polisher
The variable speed polisher’s comfortable two-handle design reduces fatigue
10-foot cord for great mobility
Includes foam applicator for easy wax or polish application
Random orbits at 4,400 revolutions per minute for a swirl-free finish
10-foot cord car and boat polishing
Includes a comfortable two-handle design
Measures 13.8-by-6.2-by-8.6-inches; Weight 5.3-lbs
Black & Decker 6-Inch Random Orbit Waxer/Polisher Includes a foam applicator bonnet, two polishing bonnets
DEWALT Buffer/Polisher, Variable Speed, Soft Start, 7-Inch/9-Inch (DWP849X), Yellow
About this item
The 12 amp, car polisher features all ball-bearing construction for powerful, long life and performance for the most demanding applications.
The electronic module of the variable speed polisher maintains a specified speed under load delivering better finish results
The DEWALT polisher’s conveniently located variable speed dial allows the user to set the maximum speed from zero to 600/3500 rpm for different materials and applications.
The variable speed trigger allows the user to control the speed from 0 to the dialed maximum setting on this machine.
Heat-treated, precision-cut steel gears for smooth operation
The wool ingestion shield increases tool life and reduces service costs by eliminating wool ingestion
Nomar rubber reduces gear case cover surface imperfections and improves the gripping surface.
DEWALT’s DWP849X 7-inch/9-inch Variable-Speed Polisher with Soft Start offers the best power and performance thanks to its 12-amp motor and variable-speed capability. Whether you’re polishing cars and boats for project detailing or finishing metal and concrete surfaces, the featured DWP849X provides the speed and control needed for applications often undertaken by metal fabricators, paint specialists, auto and boat dealers, and DIYers.
The DWP849X’s commanding 12-amp motor delivers 1,250 peak watts out and 0-600/0-3,5000 RPM power through demanding applications, yet the conveniently located two-finger variable-speed trigger lets you maintain complete control no matter the speed. gives All-ball-bearing construction and heat-treated precision-cut steel gears to ensure longer-term durability and smoother operation. In addition, it is equipped with DEWALT’s exclusive Control Finishing System with a soft start, which provides improved speed control and finishing quality. The integrated wool ingestion shield extends the life of the polisher and reduces costs associated with servicing and repairs.
All that power doesn’t compromise user comfort, though, thanks to the DWP849X’s light 6.7-pound weight that lets you polish and finish surfaces for long periods of time and at different angles. Additionally, it comes with a three-position bell handle with traditional side handles, expanding the number of gripping options to best tackle the project at hand. The rear handle is ergonomically designed with a rubber over-mold to improve comfort, and the non-marring rubber gear case cover finish helps minimize scratches or scratch marks—combining the best form and function for any polishing need.
The DWP849X’s included hook-and-loop backing pad makes for quick and easy tool-free accessory changes, and the DWP849X is compatible with any number of brands of hook-and-loop accessories to maximize options depending on the application.